

ZORTRAX M300 DUAL
The Zortrax M300 Dual is the most advanced 3D printer yet from Zortrax and their first large machine with a dual extrusion system. Ideal for large models or multiple small models in short-series production, or to be part of a large scale 3D printing farm. This printer uses LPD Plus technology, a variation of FDM (Fused Deposition Modelling) technology, designed for large industrial grade results.
Large workspace
Its large workspace measuring 265x265x300mm is sufficient to print big models in one go.
Dual-extrusion system
The LPD Plus technology works with two nozzles and a double hot-end.
Blackout response system
The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.
Capacitive sensor
The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.
Advanced filament control
The M300 Dual automatically pauses the print when the filament’s jammed, run out, or when the nozzle gets clogged.
External materials support
Third-party filaments available on spools are fully supported in both single and dual extrusion modes.
Interchangeable build-platforms
With a capacitive displacement sensor the M300 Dual can automatically calibrate to work with glass, perforated, or other types of build platforms. This way it’s possible to customise the printer for the project at hand.
TECHNICAL SPECIFICATION
Device features
BUILD VOLUME | 265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in) |
---|---|
NOZZLE DIAMETER | 0.4 mm (0.016 in) |
EXTRUDER | Dual material extruder with material jam detection |
EXTRUDER COOLING SYSTEM | Two fans cooling the extruder; radial fan cooling the print |
HOTEND | Dual material hotend |
PLATFORM | Heated; Perforated/Glass |
MATERIAL ENDSTOP | 2 x Mechanical |
CONNECTIVITY | Wi-Fi, Ethernet, USB |
OPERATING SYSTEM | Android |
PROCESSOR | Quad Core |
TOUCHSCREEN | 4″ IPS 800×480 |
CAMERA | Yes |
Printing
TECHNOLOGY | LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures |
---|---|
LAYER RESOLUTION | 100 – 300 microns (for 0.4 mm 0.016 in nozzle) |
MINIMAL WALL THICKNESS | 400 microns (for 0.4 mm 0.016 in nozzle) |
PLATFORM LEVELING | Automatic measurement of platform points height / manual measurement of platform points height |
Temperature
MAXIMUM PRINTING TEMPERATURE (EXTRUDER) | 310° C (590° F) |
---|---|
MAXIMUM PLATFORM TEMPERATURE | 105° C (221° F) |
AMBIENT OPERATION TEMPERATURE | 20 – 30° C (68- 86° F) |
STORAGE TEMPERATURE | 0 – 35° C (32- 95° F) |
Filaments
DEDICATED FOR SINGLE EXTRUSION | Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA |
---|---|
DEDICATED FOR DUAL EXTRUSION | Z-PETG, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM |
EXTERNAL FILAMENTS | Applicable |
SUPPORT | Mechanically removed – printed with the same material as the model / Dissolvable – printed with a different material than the model |
FILAMENT CONTAINER | Spool |
FILAMENT DIAMETER | 1.75 mm (0.069 in) |